configuration fuses


Closed Thread
Results 1 to 2 of 2
  1. #1
    Join Date
    Jan 2005
    Posts
    72

    Default configuration fuses

    hello together

    as a beginner in pbp as well in the forum i see a lot of questions about the configuration fuses in general. i've found some information about setting them in a programm, but i didn't found an in detail description what they do and can make exactly. does anyone know a good source? thanks

    there is thread from melanie with a description http://www.picbasic.co.uk/forum/showthread.php?t=543 about to define the fuses in the code. also i find a good site from melabs : http://www.melabs.com/support/config_defaults.htm

    i have the pbp manual as well as two books : Programming PIC Microcontrollers With PICBASIC (Hellebuyck) and Physical Computing (o'Sullivan/Igoe) which have no explanation to config fuses

  2. #2
    Join Date
    Jul 2003
    Posts
    2,358


    Did you find this post helpful? Yes | No

    Default Read the DATASHEET for your PIC.

    >> "but i didn't found an in detail description what they do and can make exactly. does anyone know a good source?"

    Yes, it's called the Datasheet.

    >> "there is thread from melanie..."

    If you read it, it tells you all you need to know... and even tells you where in the Datasheet to look.

    Section 1. What are the Configuration Fuses?
    Section 3. Where can I find a List of the Configuration Definitions?

    >> "i have the pbp manual as well as two books : Programming PIC Microcontrollers With PICBASIC (Hellebuyck) and Physical Computing (o'Sullivan/Igoe) which have no explanation to config fuses"

    You should detail your complaints to the respective authors. Just shows this forum is more informative!

Similar Threads

  1. Presetting Configuration Fuses (PIC Defines) into your Program
    By Melanie in forum FAQ - Frequently Asked Questions
    Replies: 82
    Last Post: - 15th December 2013, 09:54
  2. 18F4620 Fuses configuration
    By Pimentel in forum mel PIC BASIC Pro
    Replies: 4
    Last Post: - 4th October 2008, 13:23
  3. meProg configuration vs setting fuses in code
    By AndrewC in forum General
    Replies: 2
    Last Post: - 10th June 2008, 14:00
  4. 16F88 MPASM Fuses
    By DynamoBen in forum mel PIC BASIC Pro
    Replies: 11
    Last Post: - 19th May 2006, 00:41
  5. MCSP BootLoader and Configuration Fuses
    By CocaColaKid in forum General
    Replies: 1
    Last Post: - 23rd August 2005, 14:42

Members who have read this thread : 0

You do not have permission to view the list of names.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts