I2C help Please

[LinkMTech]

Ahhh! I just checked out one of my programs and noticed that all the data had to be sent by their ASCII value.
Instead of:

I2CWRITE DPIN, CPIN, $4C, ["Hello"], NOACK

Send it:

I2CWRITE DPIN, CPIN, $4C, [$48,$65,$6C,$6C,$6F], NOACK  ' Using HEX values

or

I2CWRITE DPIN, CPIN, $4C, [72,101,108,108,111], NOACK  ' Using DEC values

My contrast and brightness values were also set a lot lower: Contrast= $1C or 28 and Brightness= $6 on a Newhaven serial display.

[snuff28]

I finally got the thing working!!! I realized that the address I was using $4C was only 7bits long, tried $98 for the address and it started working. Been working on this for about 5 days now, guess the important thing is that its working and I can now start my project as everything revolves around this lcd controller.

Thanks LinkMTech for all your input!!!!

SDA var PORTC.4                     
SCL var PORTC.3 

I2CWRITE SDA,SCL,$98, ["HELLO"]

[LinkMTech]

Awesome!
Best of luck on the rest of your project!