PORTB pull-ups are enabled with INTCON2.7 = 0
That turns on pull-ups for ALL PORTB pins.
There are no individual controls for each pin.
Pull-ups are only enabled on pins with the TRIS bit set to INPUT (1).
|
Re: RBPU question..
PORTB pull-ups are enabled with INTCON2.7 = 0
That turns on pull-ups for ALL PORTB pins.
There are no individual controls for each pin.
Pull-ups are only enabled on pins with the TRIS bit set to INPUT (1).
DT
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks