usb keypad

[theFob]

Thanks Daemon
The task I'm doing is litlle more complicated.
I need to send serial commands to other devices (HDMI Switch, etc.) and Keyboard events simultaneously from
this board. I also image a situation to receive commands from something.
If I use standart keypad I must to design serial-to-command-to-matrix decoder and vs.
By the way the board is still not recognized by Windows as HID. I check report descriptor twice,
the device descriptor seems ok but pic freezing by usbout.
May be some configs are wrong? I dont have any.

[Demon]

I'm stuck to using my cell phone so I can't do serious debugging.

Do you issue that USB SERVICE command or whatever it is called to keep your connection alive?

Sorry, wished I could be of more help.

Robert

[theFob]

OK its done. The problem was in the serial bootloader.
And for ICSP the reset cap C3 must be far below 100nF - 10nF or lower.
I will post code soon as is ready. Then will make fun with the serial bootloader. I love UARTs!
Thank you Demon, you break myself talking hardly.
Cheers to all of you.
FOB