Timing issue

Results 1 to 10 of 10

Thread: Timing issue

Threaded View

  1. - 27th November 2011, 09:53 #8
    Acetronics2's Avatar
    Acetronics2
    Acetronics2 is offline Fanatical Contributor
    Join Date
    May 2004
    Location
    NW France
    Posts
    3,653

    Did you find this post helpful? Yes | No

    Default Re: Timing issue

    Hi,

    Three things ...

    1) you use the IOC interrupt ... so that rings the " Mismatch condition " bell in my head ... see Sleep datasheet chapter.

    2) Microchip recommends to place a NOP instruction just past the Sleep one, when using the feature this way.

    3) when you push a button ... you obviously release it one day ! makes two input changes ...

    Alain
    Last edited by Acetronics2; - 27th November 2011 at 09:57.
    ************************************************** ***********************
    Why insist on using 32 Bits when you're not even able to deal with the first 8 ones ??? ehhhhhh ...
    ************************************************** ***********************
    IF there is the word "Problem" in your question ...
    certainly the answer is " RTFM " or " RTFDataSheet " !!!
    *****************************************
« Previous Thread | Next Thread »

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules