sht_75 and SHT XX pgm correction

[Andre_Pretorius]

Hi There

Can I ask that you post the complete corrected program, I am trying to get the sensor working with a 16F913 and are having issues. Another question in all the examples nobody use I2CREAD and I2CWRITE is there a reason?

Andre

[iw2fvo]

this is what Sensirion says about the interface :
quote
The serial interface of the SHT7x is optimized for sensor
readout and effective power consumption. The sensor
cannot be addressed by I2C protocol, however, the sensor
can be connected to an I2C bus without interference with
other devices connected to the bus. Microcontroller must
switch between protocols.
unquote.

I would like to see the complete program too. I have one working here since about 2011 and I am interested if something new is available .
Thanks
Ambrogio

[iw2fvo]

here I am again,
Any possibility to see the final complete code ... ?
I knew there was a problem in dew point calculation at negative temperature ) °C ) ... any advice ?
Thanks
ambrogio

[Andre_Pretorius]

Mine still gives the same value no matter what I do, will work on it again this weekend.

[iw2fvo]

I am still searching for a really working code of this sensor ... if any
Thanks
Ambro