My DT_Interrupts broke in PBP3... guess I'm too dense too figure out why

[Darrel Taylor]

DT_INTS in not part of the device configuration.
Don't put #CONFIG/#ENDCONFIG around them. Put it back to ASM/ENDASM.

And watch the indentation. ASM is sensitive to that.

[Byte_Butcher]

Thanks Darrel!
I knew I'd done something stupid and that was it!

Welll... part of it.
It did indeed get rid of those errors, but it brought up some fresh ones.



I'm clearly still not getting it right. (I seem to have lost the "embarrassed" smilie, but consider it Inserted Here.)

Here's the code again:

ASM
INT_LIST  macro    ; IntSource,        Label,  Type, ResetFlag?
        INT_Handler   TMR1GATE_INT,  _CheckCount,   PBP,  yes
     endm    
    INT_CREATE               ; Creates the interrupt processor
ENDASM

@ INT_ENABLE  TMR1GE     ; enable Timer 2 interrupts

Thanks much

[Darrel Taylor]

@ INT_ENABLE TMR1GATE_INT ; enable Timer 1 gate interrupts

[Byte_Butcher]

I'm sorry Darrel, I'm getting to where I can't even cut & paste the right code anymore.
I think I need to step away from the keyboard and go make some cookies or something instead.

THIS gives the errors shown in my last post.

'-----Set up Interrrupts
ASM
INT_LIST  macro    ; IntSource,        Label,  Type, ResetFlag?
        INT_Handler   TMR1GATE_INT,  _CheckCount,   PBP,  yes
     endm    
    INT_CREATE               ; Creates the interrupt process
ENDASM

@ INT_ENABLE  TMR1GATE_INT     ; enable Timer 1 interrupts

[Darrel Taylor]

Sorry, since you said the 2.60 code worked, I just copied from that post.

But actually, it's ... T1GATE_INT

[Byte_Butcher]

Hi Darrel,

Thanks for your help. I'm sorry I haven't followed through with this yet.

I discovered wet carpet in a spare bedroom and traced it back to a leak in the bathroom.
Rotten floor, ruined carpet, damaged wall, the whole works.
Major repairs underway and I don't know when I'll have time for PIC games again...

But I *really* appreciate all your help and I hope you and your family are having the best thanksgiving ever this year!



Steve