How much RAM and FLASH is left for the user on the smartglcd with all that hardware on board?
|
Re: T6963 / RA6963 LCD controller with PBP
How much RAM and FLASH is left for the user on the smartglcd with all that hardware on board?
|
Re: T6963 / RA6963 LCD controller with PBP
Not sure I understand...?
The board comes preloaded with a bootloader, I don't know how much RAM and FLASH it uses but it can't be much compared to what's available. Except for that the microcontroller is blank and it's up to you to use and implement (or not) the integrated hardware as you see fit. The hardware doesn't "occupy" any RAM or FLASH by sitting on the PCB.
Does that make sense or did I misunderstand the question?
/Henrik.
|
Re: T6963 / RA6963 LCD controller with PBP
No that makes sense, we just use our own code to drive the sd card / usb / lcd /touch screen etc etc
I'm interested but hope some of the very experienced members will share a few secrets about the hardware and how to get pbp to talk with it before I invest in one.
Peter
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks