Communication between two PicChip

[lerameur]

just copied and paste your code and still did not work. Same as before.....

ken

[Charles Linquis]

Do you have your TX pin set for output (TRIS = 0)?

[lerameur]

i ADDed this after I sent the code yesterday.:
TRISB = %00000000
AND

the other pic:
TRISB =%11111111

could it be in the include file?
K

[mackrackit]

If you are talking about "modedefs.inc" no. You do not need that file for what you are doing so it is not doing any harm. It is for SERIN/SEROUT and a couple other commands.

Have you tried sending/receiving to a PC?

[lerameur]

nO DID NOT SEND TO pc. Actually never done that in my life....

[Charles Linquis]

If you are using the hardware serial port (as I suggest), then the polarity will be wrong for a direct connection to a PC, so that won't work.

If you issue HSEROUT [...] and the port doesn't even toggle, then you have some other problem.

[lerameur]

I can some steady activity on the HSEROUT port. Seems to me the receiving end is a problem. I used another picF88 chip in case it would be a hardwire pin problem, but still the LCD is not showing the input. I removed the First LCDOUT and juste the one after the HSERIN and the L:CD is showing blank...