I am trying to disable the MCLR pin because I am using it to do a LCDOUT on that Pin.
I am using a PIC16F88.
I read this thread but it is not helping me out.
I still get compiling error.. illegal upcode



Code:
'LCD testing program  and Clock viewing

INCLUDE "modedefs.bas"
 OSCCON = %01110000 '8 Mhz
 Define OSC 8 

CMCON = 7 : ANSEL = 0 : ADCON1 = 7 
@ DEVICE pic16F88, MCLR_OFF


'/////////////////////////
'// LCD configuration //
'/////////////////////////

DEFINE LCD_DREG PORTA ' Set LCD Data port
DEFINE LCD_DBIT 4 ' Set starting Data bit (0 or 4) if 4-bit bus
DEFINE LCD_RSREG PORTB ' Set LCD Register Select port
DEFINE LCD_RSBIT 7 ' Set LCD Register Select bit
DEFINE LCD_EREG PORTB ' Set LCD Enable port
DEFINE LCD_EBIT 6 ' Set LCD Enable bit
DEFINE LCD_BITS 4 ' Set LCD bus size (4 or 8 bits)
DEFINE LCD_LINES 2 ' Set number of lines on LCD
DEFINE LCD_COMMANDUS 2500
DEFINE LCD_DATAUS 250
DEFINE CHAR_PACING 2000
pause 500