programming multiple DS1337

Closed Thread
Results 1 to 4 of 4

Hybrid View

  1. - 5th November 2011, 15:10 #1
    dhouston's Avatar
    dhouston
    dhouston is offline Prolific Poster
    Join Date
    Dec 2005
    Posts
    1,073

    Did you find this post helpful? Yes | No

    Default Re: programming multiple DS1337

    P13 of datasheet...
    The slave address byte contains the 7-bit DS1337 address, which is 1101000, followed by the direction bit (R/W), which, for a write, is 0.
    www.davehouston.net
  2. - 5th November 2011, 15:56 #2
    lerameur's Avatar
    lerameur
    lerameur is offline Senior Member
    Join Date
    Sep 2006
    Posts
    747

    Did you find this post helpful? Yes | No

    Default Re: programming multiple DS1337

    talks about slave mode and master mode, read and write. I dont see multiple ds1337 programming..
  3. - 5th November 2011, 17:45 #3
    dhouston's Avatar
    dhouston
    dhouston is offline Prolific Poster
    Join Date
    Dec 2005
    Posts
    1,073

    Did you find this post helpful? Yes | No

    Default Re: programming multiple DS1337

    All DS1337s have that address. I've never seen an I2C RTC that allowed you to change the address. Normally, there's no need for multiple RTCs.

    Why are you trying to use multiple RTC chips?
    www.davehouston.net
« Previous Thread | Next Thread »

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules