Changing LCD display refresh rate

Closed Thread
Results 1 to 11 of 11

Hybrid View

  1. - 3rd November 2011, 19:44 #1
    Acetronics2's Avatar
    Acetronics2
    Acetronics2 is offline Fanatical Contributor
    Join Date
    May 2004
    Location
    NW France
    Posts
    3,653

    Did you find this post helpful? Yes | No

    Default Re: Changing LCD display refresh rate

    Code:
    lp:

ADCON0.1=%1 
WHILE ADCON0.1=%1:WEND

' Store ADC results 
isense.HIGHBYTE=ADRESH 
isense.LOWBYTE=ADRESL

' Security fault verifications
IF isense**40000>imax THEN flt=1

I = I+1    ; insert @top " I var Byte " 
IF I = 1 THEN  ; also can use IF I // 200 = 1 ... and adjust "200" to the desired rate

' LCD
idisp=isense**40000
lcdout $fe,$c0,$1,$20,"1 ISENS: ",DEC idisp DIG 2,DEC idisp DIG 1,".",DEC idisp DIG 0,"A"

ENDIF


goto lp
    Last edited by Acetronics2; - 3rd November 2011 at 19:46.
    ************************************************** ***********************
    Why insist on using 32 Bits when you're not even able to deal with the first 8 ones ??? ehhhhhh ...
    ************************************************** ***********************
    IF there is the word "Problem" in your question ...
    certainly the answer is " RTFM " or " RTFDataSheet " !!!
    *****************************************
« Previous Thread | Next Thread »

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules