Found the PortC output issue - was a dumb typo! AAGH!
Still trying to configure PortA3 and 4 as input. They still read as 0...
|
Re: Configuring 16F916 for digital I/O
Found the PortC output issue - was a dumb typo! AAGH!
Still trying to configure PortA3 and 4 as input. They still read as 0...
"Do or do not, there is no try" Yoda
|
Re: Configuring 16F916 for digital I/O
Try adding ...
CMCON0 = 7
DT
|
Re: Configuring 16F916 for digital I/O
OH yeah, forgot about that one! Tried it, but Port A.3 is still reading as zero.
I'm using a push button to ground and 10K pull-up.
I have spent the usual HOURS reading the spec sheet, and this is making me nuts.
"Do or do not, there is no try" Yoda
|
Re: Configuring 16F916 for digital I/O
NEVERMIND!
I had set the voltage ref to use A.3 accidentally. DUH. It's always something stupid isn't it.
Thanks Darrell
"Do or do not, there is no try" Yoda
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks