INC and BAS files


Closed Thread
Results 1 to 4 of 4
  1. #1
    Join Date
    Jan 2010
    Posts
    24

    Default INC and BAS files

    If we wanted to switch to a PIC that is not supported by the current PBP version, is it possible to write our own BAS and INC files for the new pic? Obviously the files can be created but is there something else that is needed that an older version of PBP needs to work correctly?

  2. #2
    Join Date
    Oct 2009
    Location
    Utah, USA
    Posts
    427


    Did you find this post helpful? Yes | No

    Default Re: INC and BAS files

    I'm suprised Darrel or someone at MELabs hasn't jumped in here to help you out.

    I don't know the answer but you might want to go over to the support section at melabs.com and ask the question there.
    Dwight
    These PIC's are like intricate puzzles just waiting for one to discover their secrets and MASTER their capabilities.

  3. #3
    Join Date
    Nov 2003
    Location
    Wellton, U.S.A.
    Posts
    5,924


    Did you find this post helpful? Yes | No

    Default Re: INC and BAS files

    I'm suprised Darrel or someone at MELabs hasn't jumped in here to help you out.
    Probably if we could write the file(s) for new PICs then there would not be much of a reason to upgrade and think about the support problems.
    Dave
    Always wear safety glasses while programming.

  4. #4
    Join Date
    Jan 2010
    Posts
    24


    Did you find this post helpful? Yes | No

    Default Re: INC and BAS files

    I'm mostly worried about the 16F887a. The version I have supports the 877a and I would like to try compiling with it and see what happens.

Members who have read this thread : 1

You do not have permission to view the list of names.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts