Counting led blinks..

[tacbanon]

Hi, now I'm trying to create a usb cdc together with the reading pulse code.

asm    ;__CONFIG    _CONFIG1L, _PLLDIV_5_1L & _CPUDIV_OSC1_PLL2_1L & _USBDIV_2_1L
    __CONFIG    _CONFIG1L, _PLLDIV_2_1L & _CPUDIV_OSC1_PLL2_1L & _USBDIV_2_1L 
    __CONFIG    _CONFIG1H, _FOSC_XTPLL_XT_1H & _FCMEN_OFF_1H & _IESO_OFF_1H 
                            ;                  ;               ; Oscillator Switchover mode disabled
                            ;                  ; Fail-Safe Clock Monitor disabled
                            ; XT oscillator, PLL enabled, XT used by USB
    __CONFIG    _CONFIG2L, _PWRT_ON_2L & _BOR_ON_2L  & _BORV_2_2L  & _VREGEN_ON_2L   
    __CONFIG    _CONFIG2H, _WDT_OFF_2H 
    __CONFIG    _CONFIG3H, _MCLRE_ON_3H & _LPT1OSC_OFF_3H & _PBADEN_OFF_3H & _CCP2MX_ON_3H 
    __CONFIG    _CONFIG4L, _STVREN_ON_4L & _LVP_OFF_4L & _ICPRT_OFF_4L  & _XINST_OFF_4L & _DEBUG_OFF_4L 
endasm
DEFINE OSC 48 
DEFINE LCD_DREG PORTB
DEFINE LCD_DBIT 0
DEFINE LCD_EREG PORTB
DEFINE LCD_EBIT 5
DEFINE LCD_RSREG PORTB
DEFINE LCD_RSBIT 4
DEFINE LCD_BITS 4
DEFINE LCD_LINES 2
DEFINE LCD_COMMANDUS 2000
DEFINE LCD_DATAUS 50
PAUSE 100


Include    "cdc_desc.bas"    ' Include the HID descriptors 
buffer    Var    Byte[16]
Cnt       VAR BYTE 
Cnt = 16
TRISA.4 = 1 ' RA4/T0CKI = input to TMR0 counter
TRISA.0 = 0 ' RA0 = output for LED
CMCON = 7   ' All digital 
ADCON1 = 001111      ' A/D converter off


' increment on low-to-high transitions
T0CON   = 111000       
USBInit                   ' Initialize USART


i var byte
i=0
                             '         
Lcdout $fe, 128, "Counters: ", #i 
pause 20
Main:
    TMR0L = 0     ' Clear TMR0 count before start
    USBService        ' Service USB regularly
    
    
Loop1:
    WHILE TMR0L = 0 ' Wait for high-to-low transition
    WEND           ' on RA4/T0CKI
    pause 10
    PORTB.0 = 1    ' LED on to indicate transition seen 
    i=i+1       ' Clear screen
    buffer = i
    Lcdout $fe, 128, "Counter: ", #i   
    'PAUSE 30
    PORTB.0 = 0    ' LED off
    USBService
    USBOut 3, Buffer, cnt, Main

   END

But I got this message "USB device not recognize". What could be causing this problem?

regards,
tacbanon