Hello,
A couple questions for ya all.
First of all, I want to be able to build a small web server using a pic. I want to be able to put graphics on the pages. No large file graphics but I want to be able to store alot of them. I also want to have data points displayed on my web page (pages) that are updated in real time without reloading the whole page. I currently am using an industrial web server called an Ilon but they are about $850.00 and they do way more than what I need and are way too expensive. They have about 64MB of flash memory to store web pages but I think I could do with less than 10MB. I send data to the web server via a modbus rtu controller that you all helped me with.

Is this even possible, I have read about every post on this forum about ethernet related stuff and to tell you the truth I am a little overwhelmed. I like the idea of the xport , connectone, and the tibo, but they dont seem to have very much memory for web pages. Is there anything else out there like these devices that have more memory. Is there any other devices like these out there that are reasonably priced and have more memory. Or maybe something that memory can be added to. Of all the posts out there not many seem to have any end results. I read the nuts and volts post but did not really understand it.

If this is possible I will read more into the posts but I am exhausted from the reading. Maybe I am not using the right key words for the search.

My dream is to hook a pic to a sd card and a ENC26J80 and create a simple web server.

Am I crazy?

A while back when I started looking into this I found a post where the html code was put into a lookup table inside the pics flash memory I believe. But I could not find that example again.

Thanks
Shawn