I did it ! Full led on, full led off. Enjoy !
Code:
;               SCROLLING THERMOMETER 
;                        FINAL VERSION
;                      By NICULESCU DAN
;                     SEPTEMBER, 13, 2011
;                                                              
;                        .oooO                                 
;                        (   )   Oooo.                         
;                         \ (    (   )
;                          \_)    ) /
;                                (_/
;

@ DEVICE pic16F628A, intOSC_osc_noclkout, WDT_OFF, PWRT_OFF, BOD_OFF, MCLR_off
define osc 4
INTCON    = 0
TRISA   = %00000000                 ' CATODES TO PORTA
TRISB   = %10000000                 ' ANODES  TO PORTB
CMCON   = 7                         
DQ     var  PortB.7

'***************************************************************************************
 eeprom 0, [%10100001,%01111010,%01110110,%01101110,%10100001]      '0
 eeprom 5, [%11111111,%01111101,%00000000,%01111111,%11111111]      '1
 eeprom 10,[%01111101,%00111110,%01101110,%01110110,%01111001]      '2
 eeprom 15,[%10111101,%01111110,%01110110,%01110110,%10101001]      '3
 eeprom 20,[%11100111,%11101011,%11101101,%00000000,%11101111]      '4
 eeprom 25,[%10111000,%01111010,%01111010,%01111010,%10100110]      '5
 eeprom 30,[%10100001,%01110110,%01110110,%01110110,%10101101]      '6
 eeprom 35,[%11111110,%00001110,%11110110,%11111010,%11111100]      '7
 eeprom 40,[%10001001,%01110110,%01110110,%01110110,%10001001]      '8
 eeprom 45,[%11111001,%01110110,%01110110,%01110110,%10001001]      '9

    counter           var      byte
    scan              var      byte
    scroll            var      byte
    leddata           var      byte[36]    'Column Data for display 36 columns
    temperature       var      Word        'reading from sensor
    Sign              var      BIT
    tempA             var      byte        'Stores First digit (High)
    tempB             var      byte        'stores Second digit (Mid)
    tempC             var      byte        'stores Third digit (low)
    n                 var      byte

DS18B20_12bit     CON %01111111

START:
 CLEAR        
' Init Sensor 
 OWOUT DQ, 1, [$CC, $4E, 0, 0, DS18B20_12bit]
 OWOut DQ, 1, [$CC, $48]                   
 OWOut DQ, 1, [$CC, $B8] 
 OWOut DQ, 1, [$CC, $BE] 
 Pause 50
 OWIn DQ, 2, [temperature.byte0, temperature.byte1]
 Pause 50 
       
 OWOut DQ, 1, [$CC, $44] 
 OWOut DQ, 1, [$CC, $BE]
 OWIn DQ, 2, [temperature.byte0, temperature.byte1]         
    Sign = temperature.15
    temperature= ABS(temperature)
    temperature=((temperature >> 4)*100) + ((temperature & $F) * 100 >> 4)
    if sign then temperature= -temperature
    ; temperature=2340         ; UNCOMMENT FOR DISPLAY TEST        
     
    tempA = temperature DIG 3
    tempB = temperature DIG 2
    tempC = temperature DIG 1

 if tempA = 0 then
    FOR counter = 0 TO 4
    leddata [counter+8] = %11111111
    next
    else
    for counter = 0 to 4
        READ tempA*5+counter,leddata [counter+8]     'stores 1st digit in leddata locations 8,9,10,11,12    
    NEXT 
endif    
    FOR counter = 0 TO 4
        READ tempB*5+counter,leddata [counter+14]    'stores 2nd digit in leddata locations 14,15,16,17,18
    NEXT
    
    FOR counter = 0 TO 4
        READ tempC*5+counter,leddata [counter+23]    'stores 3rd digit in leddata locations 23,24,25,26,27
    NEXT    
    


    
for n=0 to 7
leddata [n] = %11111111
next n
    leddata [13] = %11111111
    leddata [19] = %11111111
    leddata [20] = %00111111    ' DECIMAL POINT
    leddata [21] = %00111111
    leddata [22] = %11111111
    leddata [28] = %11111111

    leddata [29] = %11111100    ' degrees c
    leddata [30] = %11111100
    leddata [31] = %11100011
    leddata [32] = %10111101    
    leddata [33] = %10111101
    leddata [34] = %10111101
    leddata [35] = %11111111

LOOPing:
FOR scroll = 0 TO 35
    FOR scan = 0 TO 10
        PORTA=%11111111
        PAUSE 1
        PORTb = 1
        FOR counter = 0 TO 7
            PORTa = leddata [counter]          
            pAUSE 1          
            PORTb = PORTb * 2
        NEXT
    NEXT
    FOR counter = 0 TO 34 
        leddata [counter] = leddata [counter+1]
    NEXT
NEXT
GOTO START
END