Smooth LED fading via PWM

[SteveB]

How about something like this:

Data 1,1,1,1,1,1,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,3, _
  3,3,3,3,3,3,3,3,3,3,3,3,4,4,4,4,4,4,4,4,4,4,4,5,5,5, _
  5,5,5,5,5,6,6,6,6,6,6,6,7,7,7,7,7,7,8,8,8,8,8,8,9,9, _
  9,9,10,10,10,10,10,11,11,11,11,12,12,12,13,13,13,13, _
  14,14,14,15,15,15,16,16,16,17,17,18,18,18,19,19,20,  _
  20,20,21,21,22,22,23,23,24,24,25,26,26,27,27,28,29,  _
  29,30,31,31,32,33,33,34,35,36,36,37,38,39,40,41,42,  _
  42,43,44,45,46,47,48,50,51,52,53,54,55,57,58,59,60,  _
  62,63,64,66,67,69,70,72,74,75,77,79,80,82,84,86,88,  _
  90,91,94,96,98,100,102,104,107,109,111,114,116,119,  _
  122,124,127,130,133,136,139,142,145,148,151,155,158, _
  161,165,169,172,176,180,184,188,192,196,201,205,210, _
  214,219,224,229,234,239,244,250,255
 
Smooth_fade:
    IF Count1 = 0 THEN 
         duty = 0
    ELSE
         IF Count1 < 26 THEN 
             duty = 1
         ELSE
             Read Count1-25, duty
         ENDIF
    ENDIF
    RETURN

WriteUserByte:
    WRITE 255, UserByte
    RETURN

ReadUserByte:
    READ 255, UserByte
    RETURN

Now you have the upper 25 EEPROM addresses to use. More space could be saved by using similar logic. But this hopefully gets the point across.

Good luck,
Steve