Pulsin Stabilization

[Bobbo_ZA]

Thought about that too, tried it on a 2.4ghz set (which should be a more solid signal) and yet it still does it, also I would expect it to remain in the last state when the Rx is off yet they still randomly turns on and off again, :-(. I tried a 1k res to ground from GPIO.3 but then it does not work at all, :-(

Its ironic that something this "simple" is proving such an issue, probably spent 24 hours solid on this project and hundreds of rewrites but still not etting it, :-(

I have another circuit that i had done for another application where i used the same principles that works flawlessly, yet this just doesnt, only this one is on vero board.