Premade PCB for PIC
Hi Guys
Has anyone seen a premade PCB for a pic with 5v Voltage regulator and Oscillator on it? Something like this one for example http://nicegear.co.nz/arduino-boards/arduino-pro-mini-5v/ This one has got plenty of pins 16Mhz oscillator plenty of memory and 15 to 5 v voltage regulator on it. All of it is in a very small package that can be soldered to a veroboard and become a core of a simple project.
Regards
Last edited by netstranger.nz; - 27th August 2011 at 03:11.
|
|
Re: Premade PCB for PIC
http://www.myamicus.co.uk/
I know Lester likes these ;D
If you do not believe in MAGIC, Consider how currency has value simply by printing it, and is then traded for real assets.
.
Gold is the money of kings, silver is the money of gentlemen, barter is the money of peasants - but debt is the money of slaves
.
There simply is no "Happy Spam" If you do it you will disappear from this forum.
|
Re: Premade PCB for PIC
These aren't quite out yet, so the documentation is a bit low right now. It's a board based on a PIC18F47J53. It's a 3.3v chip, but it has 10 5v tolerant pins. Most of these pins are available at the bottom of the board, and can be plugged into a breadboard. Comes with a 5v and 3.3v regulator, and is able to talk to 3.3v or 5v devices. The mappable pins make it quite nice to move ports where you want them. It is bigger than the Nano, but a lot smaller than the shield.
http://www.scalerobotics.com
Last edited by ScaleRobotics; - 17th October 2011 at 04:49.
|
Re: Premade PCB for PIC
Thanks a lot everyone for your replies. These all look very interesting.
|
Re: Premade PCB for PIC
There's also the UBW. I like the 44 pin, but no one sells it. You have to make it. http://www.schmalzhaus.com/UBW/ The 28 pin device can be purchased at www.sparkfun.com.
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks