Premade PCB for PIC

Results 1 to 6 of 6

Threaded View

  1. - 27th August 2011, 03:57 #4
    ScaleRobotics's Avatar
    ScaleRobotics
    ScaleRobotics is offline Prolific Poster
    Join Date
    Feb 2006
    Location
    Gilroy, CA
    Posts
    1,530

    Did you find this post helpful? Yes | No

    Default Re: Premade PCB for PIC

    These aren't quite out yet, so the documentation is a bit low right now. It's a board based on a PIC18F47J53. It's a 3.3v chip, but it has 10 5v tolerant pins. Most of these pins are available at the bottom of the board, and can be plugged into a breadboard. Comes with a 5v and 3.3v regulator, and is able to talk to 3.3v or 5v devices. The mappable pins make it quite nice to move ports where you want them. It is bigger than the Nano, but a lot smaller than the shield.

    Name: AeroBot.jpg Views: 1323 Size: 276.2 KB

    http://www.scalerobotics.com
    Last edited by ScaleRobotics; - 17th October 2011 at 04:49.
« Previous Thread | Next Thread »

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules