Hi,
Here's a piece of code working with a 32bit accumulator, the lookuptable from the code Hank linked to and the resulting waveform plotted in Excel with addvalues of:
1) 512500
2) 128500
3) 22825

Code:
LSW  VAR WORD              ' Least significat word of accumulator
MSW  VAR WORD              ' Most significatn word of accumulator
 
ADDL VAR WORD              ' Least significant work of value to add
ADDH VAR WORD              ' Most significant word of value to add 
 
Out VAR BYTE                    ' This is the actual output from the lookup table
 
Temp VAR WORD
 
OverFlow VAR BIT             ' Gets set when 32bit accumulator overflows.
 
i VAR WORD
 
Init:
  LSW = 0 
  MSW = 0
  AddL = 500
  AddH = 2000   ' 50*256+500=768500
 
Pause 3000
 
Main:
For i = 1 to 1000
  OverFlow = 0
  TMR1H = 0
  TMR1L = 0
 
  Gosub Add
  Gosub GetValue
 
  HSEROUT["Count: ", DEC4 i, "  MSW: ", DEC5 MSW, "   LSW: ", DEC5 LSW, "   Overflow: ", BIN Overflow, "  Out: ", DEC Out, "  Ticks: ", DEC5 TMR1H*256+TMR1L, 13]
  Pause 5
NEXT
 
END
 
Add:
  T1CON = 1             ' This is just used to measure the execution time
 
  Temp = LSW            ' Remember least significant word
  LSW = LSW + ADDL      ' Add low word 
 
  If LSW < Temp Then ' Did we wrap around/overflow?
    MSW = MSW + 1       ' Increment high word
    If MSW = 0 Then OverFlow = 1  ' Did we overflow high word?
  ENDIF
 
  Temp = MSW            ' Remember high word
  MSW = MSW + ADDH      ' Add high word 
 
  If MSW < Temp Then ' Did we wrap around/overflow?
    OverFlow = 1     ' Set flag
  ENDIF
 
T1CON = 0
RETURN
 
GetValue:
Lookup MSW.HighBYTE, [$80,$83,$86,$89,$8C,$8F,$92,$95,$98,$9C,$9F,$A2,$A5,$A8,$AB,$AE,$B0,$B3,$B6,$B9,$BC,$BF,$C1,$C4,_
$C7,$C9,$CC,$CE,$D1,$D3,$D5,$D8,$DA,$DC,$DE,$E0,$E2,$E4,$E6,$E8,$EA,$EC,$ED,$EF,$F0,$F2,$F3,$F5,$F6,$F7,$F8,$F9,$FA,$FB,$FC,$FC, _
$FD,$FE,$FE,$FF,$FF,$FF,$FF,$FF,$FF,$FF,$FF,$FF,$FF,$FF,$FE,$FE,$FD,$FC,$FC,$FB,$FA,$F9,$F8,$F7,$F6,$F5,$F3,$F2,$F0,$EF,$ED,$EC, _
$EA,$E8,$E6,$E4,$E2,$E0,$DE,$DC,$DA,$D8,$D5,$D3,$D1,$CE,$CC,$C9,$C7,$C4,$C1,$BF,$BC,$B9,$B6,$B3,$B0,$AE,$AB,$A8,$A5,$A2,$9F,$9C, _
$98,$95,$92,$8F,$8C,$89,$86,$83,$7F,$7C,$79,$76,$73,$70,$6D,$6A,$67,$63,$60,$5D,$5A,$57,$54,$51,$4F,$4C,$49,$46,$43,$40,$3E,$3B, _
$38,$36,$33,$31,$2E,$2C,$2A,$27,$25,$23,$21,$1F,$1D,$1B,$19,$17,$15,$13,$12,$10,$0F,$0D,$0C,$0A,$09,$08,$07,$06,$05,$04,$03,$03, _
$02,$01,$01,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$01,$01,$02,$03,$03,$04,$05,$06,$07,$08,$09,$0A,$0C,$0D,$0F,$10,$12,$13, _
$15,$17,$19,$1B,$1D,$1F,$21,$23,$25,$27,$2A,$2C,$2E,$31,$33,$36,$38,$3B,$3E,$40,$43,$46,$49,$4C,$4F,$51,$54,$57,$5A,$5D,$60,$63, _
$67,$6A,$6D,$70,$73,$76,$79,$7C],Out
RETURN
The add routine works with two words instead of four bytes and takes ~86 cycles normally but 121 cycles when it overflows. Not the most effecient code for sure but it does seem to work. If you're running at 32Mhz and interrupting at 20kHz that's still 400 cycles between interrupts.

Name: DDS_Excel.jpg Views: 1959 Size: 79.8 KB

/Henrik.