16F727 ADC problem

[VeryEvilBetty]

Hello

I cant get get ADC to work on my 16F727 already tried alot for 3 hours

Im trying to get it to work on E1 and E0

[mister_e]

Hi and welcome aboard!
Rule #1: post your code here and we will help you to spot the problem... unless you may end up with comments like "My crystal is broken..." and plah plah plah

[Jumper]

Rule #2: Have you checked with a voltmeter that the desired signal is present on the legs of the PIC and that the level is less than VDD.

[VeryEvilBetty]

Could find a edit button.

Device 16F727
Config1 DEBUG_OFF, BOR_OFF, CP_OFF, MCLRE_OFF, WDT_OFF, INTOSCIO
Xtal 16
;         76543210
PORTB  = %00000000
TRISB  = %00000010
ANSELB = %00000000  ;Or %00000001 or %00000010 or %00000000
;         76543210
ANSELE = %00000010
PORTE  = %00000000
TRISE  = %00000010
 
DEFINE ADC_BITS 10
DEFINE ADC_CLOCK 3
DEFINE ADC_SAMPLEUS 10
ADCON0 = %00011001
ADCON1 = %01110011

Declare LCD_ENPin = PORTB.3   ;De EN aansluiting moet nu aan PORTA.6
Declare LCD_RSPin = PORTB.2   ;De RS aansluiting moet nu aan PORTA.7
 

Symbol potmeter   = PORTE.1 
Symbol voltmeting   = PORTE.2   

Dim var1 As Word
Dim var2 As Word

'-------[INITIALISE THE PICMICRO]----------------------------------------
Clear                         ;Wis alle RAM geheugen
DelayMS 500    ' Wait for the PICmicro to stabilise
Cls  
Print "Rdy"       
GoTo main   ' Jump over the subroutines


main:
While 1 = 1 

             
  
  ADCIN 5, var1
  ADCIN 6, var2
  Print At 1,1, Dec var1  
  Print At 2,1, Dec var2  

Wend   

End

[VeryEvilBetty]

yes the signal is present on the leg of the pic but i just get a 3 diget number that keeps changeing and doesnt respond when i turn on my potmeter

[mackrackit]

I think you will have better luck on the Proton forum.
http://www.protonbasic.co.uk/

When you post there you will want to describe how you have the hardware setup along with the code.