PBP 2.50 with 16F722A

[ScaleRobotics]

There have been lots of goodies added since 2.50, so an upgrade is highly recommended.

But, the A an non A 16F722 chip are the same in PBP mind. Only differences are in MPASM. So, if you copied the 16F722.inc and bas files, to 16F722A.inc and base files, then edited the line:

INCLUDE "P16F722.INC" ; MPASM Header
to read:
INCLUDE "P16F722A.INC" ; MPASM Header

You should be set.

[mister_e]

nah, just select the not A in the IDE, compile, program, enjoy...or not

[luminas]

Thank you comrades, I will place an order for 16F722A tomorrow

As for the upgrade, I would like to upgrade to PBP3 Gold, but I bought my PBP from digikey, and melabs said on their website that they provide NO upgrade for the distributors :
http://store.melabs.com/cat/PBPUP.html

I still have the purchase receipt from digikey, do you think can I am eligible for upgrade ?

[Ioannis]

Yes, directly from Melabs. You can download the big fat file that includes all (MPLAB 8.73, MCSX5, PBP3, Manual) and then from the included tool make the update requiring the activation code. It may take some time for the e-mail of the code to arrive.

Ioannis

[Darrel Taylor]

As for the upgrade, I would like to upgrade to PBP3 Gold, but I bought my PBP from digikey, and melabs said on their website that they provide NO upgrade for the distributors :
http://store.melabs.com/cat/PBPUP.html

I still have the purchase receipt from digikey, do you think can I am eligible for upgrade ?

Sure, a receipt from digikey is fine.
You can email it to [email protected]

When you download PBP3 it is fully functional for 15-days, so any delays in verifying previous purchases isn't a problem.

Download PBP3 from http://PBP3.com