So If the switch is not pressed, the input pin is floating, unless there are weak pull-ups in play here. If not, try adding a pull-up to the input. This way the input is either high or low, but never allowed to float.
|
Re: Newbie help. RGB Led on a PIC10F202
So If the switch is not pressed, the input pin is floating, unless there are weak pull-ups in play here. If not, try adding a pull-up to the input. This way the input is either high or low, but never allowed to float.
-Bert
The glass is not half full or half empty, Its twice as big as needed for the job!
http://foamcasualty.com/ - Warbird R/C scratch building with foam!
Members who have read this thread : 1You do not have permission to view the list of names.
Posting Permissions
Bookmarks