Newbie help. RGB Led on a PIC10F202

[mister_e]

        Red         var GPIO.0
        Green       var GPIO.1
        Blue        var GPIO.2
        SwitchPin   var GPIO.3
        
        ButtonCount VAR BYTE
        ButtonCount = 0
        
        ;Make sure LEDs are off
        HIGH Red
        HIGH Green
        HIGH Blue

MAIN:
        IF SwitchPin = 1 THEN
                If ButtonCount<3 THEN
                        PWM GPIO.0(ButtonCount),127,100
                        ButtonCount = ButtonCount + 1
                    ELSE
                        ButtonCount = 0
                    ENDIF
                endif
        GOTO MAIN