Newbie help. RGB Led on a PIC10F202

[brianmorris]

Simple circuit. VDD hooked up to 3.7v, GPIO.0 to Red Lead, GPIO.1 to Green Lead, GPIO.2 to Blue Lead, GPIO.3 to Switch and ground when pressed, Vss hooked to Ground. And of course resistors coming from each of the I/O pins to the LED cathodes while the anode goes to 3.7v.

Steve, When i run your code i get all three leds on, making white, press button i get Bright Blue, press button again i get more of a regular blue, again i get a dim green with both green and red leds lit.

But at least the switch is working.