Sharp pulse on ADC input and NAP

Results 1 to 12 of 12

Threaded View

  1. - 14th August 2011, 15:52 #5
    ardhuru's Avatar
    ardhuru
    ardhuru is offline Senior Member
    Join Date
    Oct 2004
    Posts
    448

    Did you find this post helpful? Yes | No

    Default Re: Sharp pulse on ADC input and NAP

    Bingo, Bruce! My mistake, the trigger amplitude is more like 0.5 volts, so I just edited the VRCON bits and it works like a charm. But, I measure around 200 uA in standby now. Still a HUGE improvement over my earlier 800 uA, but with the NAP I was getting a draw of about 30 uA. Am I doing something wrong?

    All above readings are on my breadboard at 5 volts, while testing. When its finalized the circuit will work on 3.3 volts, so I guess the consumption would be reduced significantly.

    Regards,

    Anand
    Last edited by ardhuru; - 14th August 2011 at 16:01.
« Previous Thread | Next Thread »

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules