I'm a beginner / noob so please excuse me ahead of time for being a goof.
I found this work done by Gabi MIHAILA ... it seem's to contain a good start to working in PICBASIC with the ENC28J60...
http://download.collem.nl/enc28j60.zip
The include file (the driver?) looks especially good as it seems to include everything to at least get us to an initialized setup.
I'm expecting to receive my ENC28J60's shortly.. i've also ordered some MAGJACK RJ45 jacks (they have integrated magnetics) and am hoping to have the initial circuit on my breadboard soon as I'm eager to get more farmiliarized with network capable microcontroller applications.
The main areas right now (before I've really done anything - but after a fair amount of reading) of concern are:
A) Clock source (PIC has seperate crystal? PIC is Clock from ENC28J60? how does this all effect SPI etc.)
B) 3.3v levels of the ENC28J60 and 5v PIC... Can I run at 3.3v all around or should i expect to be implementing some kind of level shifting? (not to many sources describe the particulars in this area.)
C) Debugging interface
Is there a more appropriate area to be posting all this?
Bookmarks