PortC.7 general I/O output problem

Closed Thread
Results 1 to 13 of 13

Hybrid View

  1. - 1st August 2011, 16:18 #1
    cncmachineguy's Avatar
    cncmachineguy
    cncmachineguy is offline Senior Member
    Join Date
    Aug 2010
    Location
    Maryland, USA
    Posts
    869

    Did you find this post helpful? Yes | No

    Default Re: PortC.7 general I/O output problem

    breadboard - breadboard - breadboard - breadboard

    Cmon Steve, say it with me.
    -Bert

    The glass is not half full or half empty, Its twice as big as needed for the job!

    http://foamcasualty.com/ - Warbird R/C scratch building with foam!
  2. - 1st August 2011, 16:22 #2
    mister_e's Avatar
    mister_e
    mister_e is offline Contributor
    Join Date
    Sep 2004
    Location
    montreal, canada
    Posts
    6,898

    Did you find this post helpful? Yes | No

    Default Re: PortC.7 general I/O output problem



    ----======----
    Steve

    It's not a bug, it's a random feature.
    There's no problem, only learning opportunities.
  3. - 2nd August 2011, 03:29 #3
    bodgetts's Avatar
    bodgetts
    bodgetts is offline Junior Member
    Join Date
    Jun 2011
    Posts
    26

    Did you find this post helpful? Yes | No

    Default Re: PortC.7 general I/O output problem

    I am using one of those prototype boards with each individual hole plated so I can solder to it.

    I have sent my design to the PCB makers, should be here tomorrow so I will see if the problem still persists. Hopefully it is just a dodgy connection somewhere, I do have a lot of wires :-)
« Previous Thread | Next Thread »

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules