I am using neither hserout or hserin. I just want to use ports c.0 - c.7 for general output.
Have I configured my pic incorrectly?
|
Re: PortC.7 general I/O output problem
I am using neither hserout or hserin. I just want to use ports c.0 - c.7 for general output.
Have I configured my pic incorrectly?
|
Re: PortC.7 general I/O output problem
I think NO! ADCON = 7 is the same as ADCON = %00000111. so you have enabled the a/d and turned it on. Please correct this and see if it helps. It looks like you DO have the serial disabled as you wanted to.
-Bert
The glass is not half full or half empty, Its twice as big as needed for the job!
http://foamcasualty.com/ - Warbird R/C scratch building with foam!
|
Re: PortC.7 general I/O output problem
Ok, I changed the ADCON0 and ADCON1 to 0, still have the same problem. Portc.0-portc.6 work fine, it is just the last pin portc.7 that doesn't seem to change no matter what I send to it.
|
Re: PortC.7 general I/O output problem
I don't see any reason for it not to work. Maybe the circuit is bad? Breadboard or SIM? How do you know it is not working?
-Bert
The glass is not half full or half empty, Its twice as big as needed for the job!
http://foamcasualty.com/ - Warbird R/C scratch building with foam!
|
Re: PortC.7 general I/O output problem
[mondayRant]
Please say SIM
[/mondayRant]
Steve
It's not a bug, it's a random feature.
There's no problem, only learning opportunities.
|
Re: PortC.7 general I/O output problem
breadboard - breadboard - breadboard - breadboard
Cmon Steve, say it with me.
-Bert
The glass is not half full or half empty, Its twice as big as needed for the job!
http://foamcasualty.com/ - Warbird R/C scratch building with foam!
|
Re: PortC.7 general I/O output problem
----======----
Steve
It's not a bug, it's a random feature.
There's no problem, only learning opportunities.
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks