industrial control signals

Results 1 to 4 of 4

Threaded View

  1. - 16th July 2011, 01:28 #3
    gadelhas's Avatar
    gadelhas
    gadelhas is offline Contributor
    Join Date
    Aug 2008
    Location
    Portugal
    Posts
    240

    Did you find this post helpful? Yes | No

    Default Re: industrial control signals

    Even so, if it is really -10V to +10V, i made the attached shematic and the simulation and it worked fine. Probably it can be improved, but since it's 1:30am, and it was made in 5min, i think its good.

    If you have 100% PWM you will get -10V, if you have 50% you will get 0V, and if you have 0%, you will get +10V

    If you want try it, and post the results.
    Attached Images Attached Images  
    Thanks and Regards;
    Gadelhas
« Previous Thread | Next Thread »

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules