Status after @ SLEEP Command

Closed Thread
Results 1 to 9 of 9

Hybrid View

  1. - 15th June 2011, 00:11 #1
    Bruce's Avatar
    Bruce
    Bruce is offline Prolific Poster
    Join Date
    Jul 2003
    Posts
    2,405

    Did you find this post helpful? Yes | No

    Default Re: Status after @ SLEEP Command

    Try placing FLAGS = 0 just before @ SLEEP.
    Regards,

    -Bruce
    tech at rentron.com
    http://www.rentron.com
  2. - 15th June 2011, 03:17 #2
    mister_e's Avatar
    mister_e
    mister_e is offline Contributor
    Join Date
    Sep 2004
    Location
    montreal, canada
    Posts
    6,898

    Did you find this post helpful? Yes | No

    Default Re: Status after @ SLEEP Command

    From the manual...
    The LCD is initialized the first time any character or command is sent to it using LCDOUT. If it is powered down and then powered back up for some reason during operation, an internal flag can be reset to tell the program to reinitialize it the next time it uses LCDOUT:
    FLAGS = 0
    FLAGS = 0 is a lost children feature... but documented
    Steve

    It's not a bug, it's a random feature.
    There's no problem, only learning opportunities.
  3. - 17th June 2011, 15:10 #3
    sayzer's Avatar
    sayzer
    sayzer is offline SuperMod
    Join Date
    Jan 2006
    Location
    Istanbul
    Posts
    1,185

    Did you find this post helpful? Yes | No

    Default Re: Status after @ SLEEP Command

    Thank you Bruce. Problem disappeared.

    Steve, lost child saved a life.
    "If the Earth were a single state, Istanbul would be its capital." Napoleon Bonaparte
« Previous Thread | Next Thread »

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules