Problem getting button to turn on LED using 12F675

[Archangel]

Thanks guys, you were both right; rookie mistake on my part. It works now - onward and upward. Now the button turns on LED2 and off LED1. SWEET!

Welcome back Jeff,
3 years almost. I think what trips up people is this statement,
CMCON = $?? 'MAKE PINS DIGITAL
Which seems to reappear on a regular basis, perhaps copy paste, it should more factually report,
CMCON = $?? 'Disable input Comparators
The ANSEL is the 'MAKE PINS DIGITAL part of the equation, as you found out, My post here is for the future newbies who read this post.

[Jeff]

Welcome back Jeff,
3 years almost. I think what trips up people is this statement,
CMCON = $?? 'MAKE PINS DIGITAL
Which seems to reappear on a regular basis, perhaps copy paste, it should more factually report,
CMCON = $?? 'Disable input Comparators
The ANSEL is the 'MAKE PINS DIGITAL part of the equation, as you found out, My post here is for the future newbies who read this post.

3 years...yes, i probably gave up for 3 years because of this. Also, i was using picbasic, not pro. Pro is SOOOOO much easier. it is worth the lute. I was struggling with the stupid button command for a couple weeks and gave up. Then i read Chuck Hellebuyck's book; "Programming PI uC's with picbasic" and he mentioned a workaround by directly addressing memory. I am finally starting to 'get it'. Thanks.

[Archangel]

Glad to see you back, You are right, PBP IS worth the extra money.
I think the Button command is overly complicated vs 2 ifs, but maybe it saves codespace? Anyway keep on coding, the forum is here when you need it.