PIC USB to VB.NET

[Darrel Taylor]

... Since that e-mail, I've fixed their mistakes, rolled my own and everything's fine... no worries.

NEXT!

Great!

Wanna share?
Someone I know was looking for a free MIDI program.

[mister_e]

MPLAB is free, C18 has free version, Microchip framework is free and there's a MIDI-DEMO in... or he just need to roll his own based on MIDI Demo like I did, after all

It's well within the capabilities of PicBasic Pro to write a MIDI application.
It's just up to you to do it.

... or be patient 'till the public release of Or-BIT IDE, but from what I know, it's ain't going to be free and still not 100% of all freebies inside.

[mariacho]

Hi,
I would like to put this firmware in my pic18f4550, but it doesn't compile. If you have some hex file for the same code pls post it. I want to give it a run on my pic.

And for another matter at all, I want to use the previous pic with a wireless router (D-Link DI-524UP) and I want to know if there is any change necessary. Also, I think that the USB Print Server will complicate my life a bit. If anyone tried this before and has any experience with it, please share. The entire project is about a small boat controlled from laptop via the wireless router, and includes two DC motors (2 PWM signals) and one stepper. Any opinion will do. Tx a lot.

[gadelhas]

Hi,
I would like to put this firmware in my pic18f4550, but it doesn't compile. If you have some hex file for the same code pls post it. I want to give it a run on my pic.

And for another matter at all, I want to use the previous pic with a wireless router (D-Link DI-524UP) and I want to know if there is any change necessary. Also, I think that the USB Print Server will complicate my life a bit. If anyone tried this before and has any experience with it, please share. The entire project is about a small boat controlled from laptop via the wireless router, and includes two DC motors (2 PWM signals) and one stepper. Any opinion will do. Tx a lot.

Crystal Ball, please tell me why the code doesn't compile with this user?

[mariacho]

i got:
error[180] usb18mem.asm116: RES directive cannot reserve odd number of bytes in PIC18 absolute mode
warning [230] usb18mem.asm116: no memory has been reserved by this instruction

[gadelhas]

i got:
error[180] usb18mem.asm116: RES directive cannot reserve odd number of bytes in PIC18 absolute mode
warning [230] usb18mem.asm116: no memory has been reserved by this instruction

Post your code.

What is your PBP version? Also list the files that you have in your project directory.

I works fine here without any error and warning.

[mariacho]

PBP 2.60, micro code studio plus 3.0.0.5
folder content: hd_hid260.pbp, PiCUSB.pbp and all files from c:PBP/usb18

-- code removed --

thank you for your help