Connect One Ethernet shield

Closed Thread
Results 1 to 40 of 57

Hybrid View

  1. - 22nd June 2011, 15:16 #1
    mackrackit's Avatar
    mackrackit
    mackrackit is offline SuperMod
    Join Date
    Nov 2003
    Location
    Wellton, U.S.A.
    Posts
    5,924

    Default Re: Connect One Ethernet shield

    An EEPROM sample can be found here.
    http://www.picbasic.co.uk/forum/show...461#post104461
    Dave
    Always wear safety glasses while programming.
  2. - 2nd July 2011, 20:27 #2
    dhouston's Avatar
    dhouston
    dhouston is offline Prolific Poster
    Join Date
    Dec 2005
    Posts
    1,073

    Default Re: Connect One Ethernet shield

    I have made some changes in order to use this with my Zarduino system boards. In addition to rerouting the I2C bus and RESET lines, I have also modified it to work with 3V3 or 5V but only when using the default serial connection. You can use SPI, USB or RMII with 3V3 but will need to do your own level shifting for 5V (which is not very practical).
    www.davehouston.net
« Previous Thread | Next Thread »

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules