mackrackit's ConnectOne example code


Closed Thread
Results 1 to 40 of 92

Hybrid View

  1. #1
    Join Date
    Dec 2005
    Posts
    1,073

    Default Re: mackrackit's ConnectOne example code

    Yes, if you run the PIC at 5V and the ConnectOne module at 3.3V you will need to do level conversion in both directions.

    My shields have been delayed. I had a bout of atrial fibrillation resulting in a brief (4 day) hospitalization but some not so brief medical bills which have blown holes in my budget. All my projects have been set aside for the time being.

    The Spark Fun level shifter mentioned above should do what you need. (The AN213 link also shows a few different methods.) You need to deal with TX, RX & RESET. Outputs from the module (TX) need to be shifted up to 5V for input to the PIC, inputs to the module (RX, RESET) need to be shifted down to 3.3V.

  2. #2
    Join Date
    May 2004
    Location
    brighton
    Posts
    149

    Default Re: mackrackit's ConnectOne example code

    I hope you get better as quick as possible i now get it clearly

  3. #3
    Join Date
    Sep 2004
    Location
    montreal, canada
    Posts
    6,898

    Default Re: mackrackit's ConnectOne example code

    Speedy recovery, take it easy in meantime.
    Steve

    It's not a bug, it's a random feature.
    There's no problem, only learning opportunities.

  4. #4
    Join Date
    Dec 2005
    Posts
    1,073

    Default Re: mackrackit's ConnectOne example code

    I'm fine. I've had Congestive Heart Failure for about 9 years and all is under control by medication. My primary care doc even commented that I have the vital signs of a 20 year old (seems a shame to waste them on a 70 year old). And, tests in the hospital confirmed that my heart is still normal in size and pumping efficiency (ejection fraction) with no water around it.

    I just got caught in a couple of bureaucratic snafus not of my own making. I get my meds from the Veterans Administration. I was moving and the VA refused to accept my change of address over the phone, telling me I had to come, in person, with a piece of mail in-hand that I received at the new address. Simultaneously, my cardiologist for the past 9 years (outside the VA) was forced to close his practice by a non-compete lawsuit brought by the very hospital I ended up in which had recently bought the group practice he had been a member of but chose to leave after the sale. I could not reach him to get a prescription so I ran out of two critical meds which regulate BP and pulse rate. I'm back on my medication and even the VA accepted my new address with no further red tape so my supply is assured for awhile.

    I just need to clear all the hospital/doctor bills before spending anything on toys.

    But, thanks for the good wishes.
    Last edited by dhouston; - 19th August 2011 at 22:29.

  5. #5
    Join Date
    Feb 2011
    Posts
    26

    Default Re: mackrackit's ConnectOne example code

    Dave H,

    Glad you're doing well and still on this side of the grass.

    And THANK YOU for your service.

    Fuzzy

Members who have read this thread : 1

You do not have permission to view the list of names.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts