The internal 8MHz oscillator is fine for this.
I use a PicKit2 to load the hex file onto the 4550.
The internal 8MHz oscillator is fine for this.
I use a PicKit2 to load the hex file onto the 4550.
Dave
Always wear safety glasses while programming.
Hello sir john.. i would to know if the minisocket need an external antenna?or is it ok without extrnal antenna?tnx..
hello john is it ok to use the the 16F873A?...uhm sir is it ok to disconnect the PICKIT2 when your are done load it to ur PIC?tnx
Sir do you have a schematic how u connect the max232 in iwifi connectone to interface in PC?
I can not find my schematic but...
Using the Nano Socket IWifi.
Header J8 iWifi pin 8 connect to pin 12 max232
Header J8 iWifi pin 9 connect to pin 11 max 232
Max232 pin 13 connect to PC DB9 pin 3
Max232 pin 14 connect to PC DB9 pin 2
And the grounds (zero rail) are all common.
Dave
Always wear safety glasses while programming.
Ok sir..tnx..Sir mackrackit in your program and design? are u using iconfig to send to ur website and email..?tnx sir
Helo Sir...what software connectone u use to convert the HTML to image file?what is the name of software..tnx sir
The Config Utility has the program used to do the conversion.
Dave
Always wear safety glasses while programming.
Hi,
I just ordered a Connect One SocketLAN, and am doing some background searching for tips on how to hook it up to a PIC project. It looks like the serial pins are the most basic but am a little in the dark about the above conversation. Should I be adding hardware/provisions for a MAX232 circuit to talk to a terminal program too, and if so, how should it connect... to the PIC, or to the SocketLAN? I see Macrackit's code examples, but it doesn't tell me anything about how the hardware is connected. This is my first attempt at an ethernet project, and don't want to miss anything critical as I'm mulling over a board layout. I plan to start off with the PIC's serial connection to the SocketLAN for simple emails etc.
Anybody have a simple hookup drawing, or can explain what this terminal connection you're talking about is?
Thanks
Start at the beginning of the thread.
Dave
Always wear safety glasses while programming.
Bookmarks