pulsin again!anyone plz help!

[engineer7]

thanks for reply everyone..
@demon and mackaraket guys the above code is working there is nth wrong with it.i just want to add an additional functionality of on/off...

@cncmachineguy i didnt understand your reply can u elaborate a little.... plz

[cncmachineguy]

Start:
LOW SONYLED <-------------------------Here you turn off the LED
IRBUTTON=255: IRDEVICE=255
 
Pulsin irin,0,header 
if header < 1000 or header > 1350 then goto Start
 
check: 
for i =0 to 11
pulsin irin,0,tmp 
if tmp >= 500 then
Body.0[i]=1 'Sony Logic 1 is 120
else
Body.0[i]=0 ' Sony Logic 0 is 60
endif
next
IRBUTTON = Body & %01111111
if IRBUTTON <=9 then
loop:              
toggle Sonyled '<----------------------change! 
 
endif
pause 100
goto start  <--------sends program back to the beginning, this will turn off the LED