USB confused (running out of hair)

[cncmachineguy]

Steve, I agree, sort of. Everything to do USB is here for the PIC side. As for the PC side, maybe everything is here. If one wants to develop in C of VB, I think everything is prolly here. Well, If I want to work in C, "I" prolly wouldn't be here. So if thats needed, then its not all here. And VB? well what flavor?? 6 and .net? Maybe I am just too stubborn, but as a hobby, I have NO plans to buy anything from them guys. Nor am I going to get the exppress version (which may not work).

It seems I need to look further into CDC. but NOT for pic32 as the app note Dave linked would suggest.

If I find the energy to keep persuing this, I will hop back on the CDC for dummies thread and ask zillions of questions there. In the mean time, How does 1 go about accessing the "port"from their app if using CDC? I know it will be app specific, but whats the process? Does it become COMx and just use regular serial commands to use it?

[mackrackit]

With CDC the PC will think it is talking to a "regular" com port. COMxx

Here is another example that might be of use...
http://www.picbasic.co.uk/forum/cont...USB-SD-LOGGING

[cncmachineguy]

Dave, that is a great example of both USB and sd card reading/writing. So can I assume there is a LB part also?

[mackrackit]

Nope, no LB or any other custom thing on the PC for this one. In practice for me this is only plugged into a PC when real time trouble shooting a system so a terminal program like the one that comes with MCS is fine.