How about the config fuses? Smells of PGM in LVP mode to me, OR there<s some psu noise, or floating MCLR pins.. go figure
As usual, 10uF tantalum + 0.1uF as close as possible of VDD, make sure you have both VSS pins connected, 10K or so on MCLR.
|
Re: Help with ADCin
How about the config fuses? Smells of PGM in LVP mode to me, OR there<s some psu noise, or floating MCLR pins.. go figure
As usual, 10uF tantalum + 0.1uF as close as possible of VDD, make sure you have both VSS pins connected, 10K or so on MCLR.
Last edited by mister_e; - 16th May 2011 at 08:30.
Steve
It's not a bug, it's a random feature.
There's no problem, only learning opportunities.
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks