4-line LCD Help - using PortA instead of B

Closed Thread
Results 1 to 29 of 29

Hybrid View

  1. - 26th March 2005, 23:10 #1
    Tom Gonser's Avatar
    Tom Gonser
    Tom Gonser is offline Member
    Join Date
    Feb 2005
    Location
    Bellevue
    Posts
    125

    Did you find this post helpful? Yes | No

    Default

    Thanks, Bruce. I'll try that!

    Tom
  2. - 31st March 2005, 03:14 #2
    Tom Gonser's Avatar
    Tom Gonser
    Tom Gonser is offline Member
    Join Date
    Feb 2005
    Location
    Bellevue
    Posts
    125

    Did you find this post helpful? Yes | No

    Smile

    Made the change, and adjusted brightness -- WORKS!!

    THANKS FOLKS.. It was the complexity of the 2525 and brightness adjustment that was holding me back.. Crystalfontz works fine. The support there is really good too!

    Tom
« Previous Thread | Next Thread »

Similar Threads

  1. Play with LCD on PICDEM
    By The IceMan in forum mel PIC BASIC
    Replies: 5
    Last Post: - 22nd August 2008, 16:56
  2. PIC16F684 + LCD to use the 256bytes of EEPROM - HELP
    By xnihilo in forum mel PIC BASIC Pro
    Replies: 3
    Last Post: - 7th March 2008, 14:19
  3. Need help with LCD number display.
    By Steve Matson in forum mel PIC BASIC
    Replies: 8
    Last Post: - 26th June 2007, 23:07
  4. having problems with Hantronix 20x4 lcd
    By Rhatidbwoy in forum mel PIC BASIC Pro
    Replies: 16
    Last Post: - 22nd December 2005, 12:22
  5. 4 line LCD with 16F88
    By anj in forum mel PIC BASIC Pro
    Replies: 1
    Last Post: - 7th February 2004, 09:06

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules