4-line LCD Help - using PortA instead of B

Results 1 to 29 of 29

Threaded View

  1. - 25th March 2005, 14:33 #15
    bbarney's Avatar
    bbarney
    bbarney is offline Member
    Join Date
    Nov 2004
    Posts
    107

    Did you find this post helpful? Yes | No

    Default 4 line lcd

    before writing off 2 lcd's why don't you try hooking them up to your printer port like this
    http://www.myrolypoly.com/lcd_project/lcd_project.html
    it's an easy to follow article,if they work that way you'll know for sure whether it's a code or pic problem or there both bad.digikey or mouser are good sources of lcd's.
    good luck
    Last edited by bbarney; - 25th March 2005 at 14:35.
« Previous Thread | Next Thread »

Similar Threads

  1. Play with LCD on PICDEM
    By The IceMan in forum mel PIC BASIC
    Replies: 5
    Last Post: - 22nd August 2008, 16:56
  2. PIC16F684 + LCD to use the 256bytes of EEPROM - HELP
    By xnihilo in forum mel PIC BASIC Pro
    Replies: 3
    Last Post: - 7th March 2008, 14:19
  3. Need help with LCD number display.
    By Steve Matson in forum mel PIC BASIC
    Replies: 8
    Last Post: - 26th June 2007, 23:07
  4. having problems with Hantronix 20x4 lcd
    By Rhatidbwoy in forum mel PIC BASIC Pro
    Replies: 16
    Last Post: - 22nd December 2005, 12:22
  5. 4 line LCD with 16F88
    By anj in forum mel PIC BASIC Pro
    Replies: 1
    Last Post: - 7th February 2004, 09:06

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules