|
Re: PIC18 timer0 interrupt handler, still not getting it
Are you sure you are in the correct bank when you try to BCF and BSF the port? When you are setting them in the setup, PBP is tending to the banks. but when you BCF or BSF, YOU must ensure the correct bank.
PBP will leave you in bank 0, so if the LAT is not (highly likely) you are setting and clearing something else.
-Bert
The glass is not half full or half empty, Its twice as big as needed for the job!
http://foamcasualty.com/ - Warbird R/C scratch building with foam!
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks