16F1824 "HPWM 2" woes (command seemingly forces PortC.3 from analogue to digital)

[HankMcSpank]

I concur...the 16F182x are a great range of chips...absolutely chocka with features.

I can't say I've had a lot of setup problems with them (certainly nothing that wasn't obvious when I complied)....other than this pesky HPWM 2 issue, the one other issue I had Darrel kindly helped sort....

I needed to modify the 16F1824.INC file (mods in red)....

;****************************************************************
;*  16F1824.INC                                                 *
;*                                                              *
;*  By        : Leonard Zerman, Jeff Schmoyer                   *
;*  Notice    : Copyright (c) 2010 microEngineering Labs, Inc.  *
;*              All Rights Reserved                             *
;*  Date      : 09/14/10                                        *
;*  Version   : 2.60b                                           *
;*  Notes     :                                                 *
;****************************************************************
        NOLIST
    ifdef PM_USED
        LIST
        "Error: PM does not support this device.  Use MPASM."
        NOLIST
    else
        LIST
        LIST p = 16F1824, r = dec, w = -302
        INCLUDE "P16F1824.INC"	; MPASM  Header
        ;__config _CONFIG1, _FOSC_HS
        ;__config _CONFIG2, _PLLEN_OFF & _LVP_OFF
        NOLIST
    endif
        LIST
BLOCK_SIZE	EQU	32
CCPTMRS0 = CCPTMRS

The first two mods (semi colons) are standard fayre, but that last one would have taken me a good few years to get to the bottom of on my own.