This BT module requirement is fairly simple:

Bluesoleil, a BT software is needed to establish communication first. No communication can be made until both SKKCA-21 and PC with BT dongle is paired.

[spoiler]http://www.cytron.com.my/usr_attachm...6.2.227.10.zip[/spoiler]

PIC Basic Pro Coding:



[spoiler]
Code:
INCLUDE "modedefs.bas"  ' Serial communication mode definition file
        DEFINE OSC 20           ' Oscillator speed is set to 20MHz
        TRISB = %11111111
        TRISC = %10000000       ' RC.7 => USART RX pin set to input
        PortC = 0
        SPBRG = 10              ' Baud Rate = 115200
          
        '    Variable definition
        '    ===================
        '
        count01     VAR BYTE    ' variable to store TXREG content    
        stop01      VAR BYTE 
        TXSTA.2 = 1             ' High speed
        TXSTA.5 = 1             ' Enable transmit 
        RCSTA.7 = 1             ' Bit 7, SPEN, Enable USART   
        RCSTA.4 = 1             ' Bit 4, CREN, Enable Continuous Receive 
        stop01 = 0
        mainloop:
         
                
        IF (PortB.7 = 1) THEN 
        
        FOR count01 = 0 TO 9
        
        TXREG = count01 + $30             ' Transmit Data                       
        
        PAUSE 2000
        HIGH PortD.2
        PAUSE 2000
        LOW  PortD.2
        
        Next
       
        ENDIF 
          
        GOTO mainloop
        
        END
[/spoiler]

Someone please close this thread.......