EASYPIC4 Board Giveaway

Closed Thread
Results 1 to 40 of 52

Hybrid View

  1. - 15th April 2011, 19:26 #1
    larryvc's Avatar
    larryvc
    larryvc is offline Junior Member
    Join Date
    Mar 2011
    Location
    Redmond WA USA
    Posts
    4

    Did you find this post helpful? Yes | No

    Default Re: EASYPIC4 Board Giveaway

    Quote Originally Posted by rmteo View Post
    Bert, have you made progress? Looks like no one else (besides Walter and yourself) has a solution for this contest. Do you (Walter, or anyone else) feel that perhaps it is too difficult and the contest should be changed to something simpler?
    rmteo,

    From a mutual friend (mathematical place holder) on another forum:

    What you kidding me? it's not rocket science.
  2. - 26th April 2011, 18:19 #2
    rmteo's Avatar
    rmteo
    rmteo is offline Senior Member
    Join Date
    May 2007
    Posts
    604

    Did you find this post helpful? Yes | No

    Default Re: EASYPIC4 Board Giveaway

    Four days to go - and it looks like there may be only one entry.
    Why pay for overpriced toys when you can have
    professional grade tools for FREE!!!
  3. - 27th April 2011, 02:43 #3
    Demon's Avatar
    Demon
    Demon is offline SuperMod
    Join Date
    Jan 2005
    Location
    Montreal, Quebec, Canada
    Posts
    3,172

    Did you find this post helpful? Yes | No

    Default Re: EASYPIC4 Board Giveaway

    I just saw this contest now.


    <---- darn tag under my name...

    That is a very nice experiment board. I've been using the Lab X1 lately.
    My Creality Ender 3 S1 Plus is a giant paperweight that can't even be used as a boat anchor, cause I'd be fined for polluting our waterways with electronic devices.

    Not as dumb as yesterday, but stupider than tomorrow!
  4. - 27th April 2011, 15:51 #4
    rmteo's Avatar
    rmteo
    rmteo is offline Senior Member
    Join Date
    May 2007
    Posts
    604

    Did you find this post helpful? Yes | No

    Default Re: EASYPIC4 Board Giveaway

    I thought the GLCD was misplaced but I found it so the development board is like in the 1st. post. It comes with a PIC18F4620 - you can use any PIC16F or PIC18F in 40, 28, 20, 18, 14 and 8 pin DIP packages. I installed a ZIF socket in the 40-pin position.

    If anyone is interested, I have a PDF of the manual (it is too large at 2.5MB to upload).
    Last edited by rmteo; - 27th April 2011 at 15:56.
    Why pay for overpriced toys when you can have
    professional grade tools for FREE!!!
  5. - 27th April 2011, 17:16 #5
    cncmachineguy's Avatar
    cncmachineguy
    cncmachineguy is offline Senior Member
    Join Date
    Aug 2010
    Location
    Maryland, USA
    Posts
    869

    Did you find this post helpful? Yes | No

    Default Re: EASYPIC4 Board Giveaway

    Oh! The prize gets even better. Is anyone working on this contest? I hate to see a great prize and contest not even attempted!
    -Bert

    The glass is not half full or half empty, Its twice as big as needed for the job!

    http://foamcasualty.com/ - Warbird R/C scratch building with foam!
  6. - 28th April 2011, 17:51 #6
    rmteo's Avatar
    rmteo
    rmteo is offline Senior Member
    Join Date
    May 2007
    Posts
    604

    Did you find this post helpful? Yes | No

    Default Re: EASYPIC4 Board Giveaway

    Quote Originally Posted by cncmachineguy View Post
    Oh! The prize gets even better. Is anyone working on this contest? I hate to see a great prize and contest not even attempted!
    Looks like nobody else, besides yourself, has any interest in this. So post your solution and lets see if you are the winner.
    Why pay for overpriced toys when you can have
    professional grade tools for FREE!!!
  7. - 29th April 2011, 15:04 #7
    cncmachineguy's Avatar
    cncmachineguy
    cncmachineguy is offline Senior Member
    Join Date
    Aug 2010
    Location
    Maryland, USA
    Posts
    869

    Did you find this post helpful? Yes | No

    Default Re: EASYPIC4 Board Giveaway

    you have shamed me into it. LOL!

    I am putting it together now, likely I will slide in just under the april 30 deadline.
    -Bert

    The glass is not half full or half empty, Its twice as big as needed for the job!

    http://foamcasualty.com/ - Warbird R/C scratch building with foam!
« Previous Thread | Next Thread »

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules