Just received my new PIC-LCD3310

[ScaleRobotics]

Oh Oh, I need some karma for my coffee.

Here is Microchip's bootloader firmware for Olixex's PIC_LCD3310 board. I think I modified it to work with the joystick button. But it is set to the downward joystick. So to go to USB bootloader, press down direction on the joystick (not button press) while you apply usb power. Then use the attached microchip exe file for bootloader. Of course, you will need a pickit2 programmer, or something, to program it the first time.



Also included in the hope of more karma is an include file for working with the lcd display. It was made from a bunch of posts in this thread.: http://www.picbasic.co.uk/forum/show...3456#post73456 Without it, the LCD is a (*replace word for really difficult here*) to program.

But using the include file makes it pretty easy to work with.

@ PrintStr 0,0, "If I write more than one line, it will scroll to the next one, and next."

PIC_LCD3310.zip