I had a working project with a PIC18F2320 and decided to change it over to a PIC18F4685 for extra programming room and more pins.

Once I changed my program for the chip and upgraded to PBP2.6A and meProg for MPASM so I could program it nothing has worked since.

Anyone have an idea why this simple program returns.

Power Up but nothing else.

I can change address to x and it will return.
Power Up
0
0
0
etc....

Any help or insight would be appreciated. I have an upgraded copy of epic coming since this just doesn't make sense to me.

'************************************************* ***************
'* Name : HandHeld *
'* Author : Brian Gennings *
'* Notice : Copyright (c) 2005 [set under view...options] *
'* : All Rights Reserved *
'* Date : 2/11/2011 *
'* Version : 1.0 *
'* Notes : RF controlled unit *
'* : *
'************************************************* ***************

DEFINE OSC 8

' ** Declare the Variables **

DEFINE DEBUG_MODE 1 ' Send Inverted serial data with debug
DEFINE DEBUG_REG PORTB ' Debug Port = PortB
DEFINE DEBUG_BIT 5 ' Debug.bit = PortB.5
'DEFINE DEBUGIN_BIT 1 'DebugIn.bit = PortB.1
DEFINE DEBUG_BAUD 9600 ' Default baud rate = 9600
DEFINE DEBUG_PACING 1000


' ** Declare A/D variables**

AD_Result Var Word ' 10-bit result of A/D conversion
Volts Var Word ' Holds the voltage after quantasizing

Quanta Con 1250

' ** Define the bits within the ADCON0 register **
CHS3 Var ADCON0.5
CHS2 Var ADCON0.4 ' ADC channel select bit
CHS1 Var ADCON0.3 ' ADC channel select bit
CHS0 Var ADCON0.2 ' ADC channel select bit
GO_DONE Var ADCON0.1 ' ADC Conversion status/ plus enable conversion-bit
ADON Var ADCON0.0 ' ADC Enable bit: 1=enabled, 0=disabled.

' ** Define the bits within the ADCON1 register **
VGFC1 Var ADCON1.5 ' Voltage reference AVSS
VGFC0 Var ADCON1.4 ' Voltage reference AVDD
PCFG3 Var ADCON1.3 ' ADC port configuration bit
PCFG2 Var ADCON1.2 ' ADC port configuration bit
PCFG1 Var ADCON1.1 ' ADC port configuration bit
PCFG0 Var ADCON1.0 ' ADC port configuration bit

' ** Define the bits within the ADCON2 register **
ADFM Var ADCON2.7 ' A/D format select
ACQT2 Var ADCON2.5 ' A/D Acquistion time
ACQT1 Var ADCON2.4 ' A/D Acquistion time
ACQT0 Var ADCON2.3 ' A/D Acquistion time
ADCS2 Var ADCON2.2 ' A/D conversion clock
ADCS1 Var ADCON2.1 ' A/D conversion clock
ADCS0 Var ADCON2.0 ' A/D conversin clock

ADIE Var PIE1.6 ' ADC interrupt enable/disable
ADIF Var PIR1.6 ' ADC interrupt flag
PEIE Var INTCON.6 ' Peripheral interrupt enable/disable
GIE Var INTCON.7 ' Global interrupt enable/disable


INCLUDE "modedefs.bas"

OSCTUNE = 0
OSCCON = %01110000

@ __CONFIG _CONFIG1H, _IESO_ON_1H & _OSC_IRCIO67_1H
@ __CONFIG _CONFIG2L, _PWRT_ON_2L & _BOREN_BOHW_2L & _BORV_0_2L
@ __CONFIG _CONFIG2H, _WDT_ON_2H & _WDTPS_128_2H
@ __CONFIG _CONFIG3H, _MCLRE_OFF_3H & _PBADEN_OFF_3H
@ __CONFIG _CONFIG4L, _LVP_OFF_4L & _DEBUG_OFF_4L
'@ __CONFIG _CONFIG5H, _CPD_ON_5H

' I/O definitions

LED var PortC.5 'LED
RFPower var porta.3
T_R var porta.5
RF_IN var portb.1
shutdown var portb.3

dat var Byte

e var portc.6
cd var portb.4
rw var portb.2
cs1 var portc.0
cs2 var portc.1
rst var portc.2
blue var porte.2
red var porta.2
green var portc.7

SDA VAR Porta.0 ' The port your SDA line is on
SCL VAR Porta.1 ' The port your SCL line is on

x_cor var word
y_cor var word
address var word


'Variables



x var byte
y var byte
j var word
k var byte

i var byte



size var byte
response var byte
sentcommand var byte

flagbag var byte
point var byte


' ** Declare the Constants **
B1200 CON 17197 ' Inverted 1200 baud for SERIN2
B2400 CON 16780 ' Inverted 2400 baud for SERIN2
B4800 CON 16572 ' Inverted 4800 baud for SERIN2


'Set variable values

x = 0
i = 0
j = 0
k = 0

goto endsub

endsub:

ADCON0.0 = 0
ADCON1 = %11001111

CMCON = 7
CVRCON = 0
LVDCON = 0


'set pins for input/output


TRISA = %00000000 'RA0 = SDA
'RA1 = SCL
'RA2 = LED BackLIght RED
'RA3 = Receiver 3 volt power
'RA4 = LANC
'RA5 = Transmit/Receive Select
'RA6 = CRX
'RA7 = CRX

TRISB = %00000011 'RB0 = touch interrupt
'RB1 = RF In
'RB2 = R/W
'RB3 = shutdown of I/O translation/
'RB4 = D/I CD
'RB5 = Serial Out Debug
'RB6 = ICSP
'RB7 = ICSP

TRISC = %00011000 'RC0 = /CS1
'RC1 = /CS2
'RC2 = /RST
'RC3 = I2C SCL Hardware
'RC4 = I2C SDA Hardware
'RC5 = LED
'RC6 = E
'RC7 = LED Backlight Green

TRISD = %00000000 'RD0 = DATA to GLCD
'RD1 =
'RD2 =
'RD3 =
'RD4 =
'RD5 =
'RD6 =
'RD7 =

TRISE = %00000011 'RE0 = Analog Input/Power supply
'RE1 = Analog Input/RSSI
'RE2 = led bACKLIGHT BLUE
'RE3 = MCLR
'RE4 = N/A
'RE5 = N/A
'RE6 = N/A
'RE7 = N/A

low T_R 'receive mode before power down
low shutdown
low RFpower

high LED
pause 200
low LED

low blue
high green
low red

debug "Power Up",13,10


for address = 0 to 235

debug dec address,13,10
pause 10
next

dat = 0
cd = 0
rw = 0
e = 0
cs1 = 0
cs2 = 0
rst = 1

pause 100

rst = 0
pause 10
rst = 1
pause 500


mainloop:

'ON INTERRUPT GoTo myint ' Define interrupt handler


main:
high LED
pause 200
low LED
pause 200

goto main



' Interrupt handler
Disable ' No interrupts past this point

myint:

' Clear interrupt flag
Resume ' Return to main program
Enable


end