Okay, so I've unsoldered an 8MHz xtal (not an 10MHz unfortunately) on a old board, and I connected this one to the PIC.
I've enabled the PLL, so my PIC clocks at 8*4=32MHz.
On the oscilloscope, I get now a 2µs pulse, it's a little better.
|
Re: Changing the sines frequency?
Okay, so I've unsoldered an 8MHz xtal (not an 10MHz unfortunately) on a old board, and I connected this one to the PIC.
I've enabled the PLL, so my PIC clocks at 8*4=32MHz.
On the oscilloscope, I get now a 2µs pulse, it's a little better.
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks